The Mounty Boardmount (M-BOARDMOUNT) is an attachment used with the Mounty Pole. Designed for lifting and moving load protection boards onto bodywork. The fork attachment cups a board safely to avoid slippage when lifted and allows it to be raised up to near maximum vehicle height before gently positioned into the two securing holders located on the upright posts on the body work. The side hook attachment of the Boardmount is used to pull the board down so that is sits firmly in the holders
It is used to place and recover load straps whilst the operator is standing safely on the ground. The Mounty Fork can also be used to place slings securely onto regular and snap hooks as fitted to Hiab type cranes. The Mounty Fork features in the ever widening range of Mounty driver aid products.
The Mounty Boardmount is made from Carbon Steel and fully Powder Coated in yellow. Manufacture is undertaken in GTF’s wholly owned factory in Noida, India. See ww.gtcfi.com.
The list below is the full range of attachments that connect to the Mounty Pole
- Mounty Head (M-HEAD) – To lift CP60 & CP60LD corner protectors to height.
- Mounty Head Major (M-HEAD-MR) – To lift CP800, CP800LD, CP1150, CP2400LD corner protectors to height.
- Mounty Throw (M-THROW) – To launch straps over a load.
- Mounty Fork (M-FORK) – Used to place and retrieve, adjust webbing and slings on Hiabs
- Mounty Hook (M-HOOK) – Used to place and retrieve, adjust and place ratchet straps
- Mounty Boardmount (M-BOARDMOUNT) – Used to place, retrieve, adjust load protection boards
- Mounty Broom (M-BROOM) – For use on a lorry bed, whilst standing on the ground
